Manufacturer: Emrys Industries Emrys industries gloves are in appearance similar to motorcycle gloves, but a little slimmer. They are made of highly damage resistant material, especially with the soles of the hand, the fingers, and the back of the hands. Around the joints there are more flexible, but still damage resistant materials. In particular the gloves are very heat resistant, and it takes extremely high temperatures to damage them, as well as being liquid resistant, not permeable to liquids. To further protect the hands there is a ceramic plate covering the back of the hands, and over the part of the fingers closest to the knuckles have small lead plates/weights in them. Although ostensibly for protection, they also serve as high effective knuckle dusters, and another lead plate along the hammer side of the hand. The other parts of the gloves that won’t affect the flexibility of the hand have ceramic plates in them. The gloves have very comfortable padding in them. In addition, between the knuckles are three powerful LED lights, that can be activated by pressing a pressure point (of the glove not the flesh) on the side of the knuckle of the index finger. Pressing it once activates the LED’s on low power, a second time medium power, and a third time high power. The high power setting is roughly comparable to a torch. Holding down the point causes the power to increase to high, pressing hard will turn it off. The internal batteries that power the LED’s are powered by the movement of the gloves, simply by the movements of the fibers.

For an additional 13 KS one can buy gloves that conceal claws. Inside the fingers tiny blades that, upon touching a pressure point at the back of the hand, a tiny one centimeter long, and coming to a very sharp point.

Prices:

• 50 KS for a pair.
• 63 KS for a pair with claws

Approved by Wes on October 21, 2005 here https://stararmy.com/roleplay-forum/index.php?threads/emrys-industries-wet-wear.12349/#post-178664