The HS-AF1-P765/01 was developed for use with the HS-AF1-1c Meqpâ'a Gulvisa (Prowler Fighter) to provide FTL capabilities, it became available in 756 CY or YE 37.

The HS-AF1-P756/01 development was initiated because of the mandates about limiting Clan Technology used in Yamatai Star Empire space. The primary change is replacing the drive system with a Tinvyma Piatypeda (Wave Rider Drive), and the Anoka Udano (Gravity Shield) was removed. Performance and features are the same as the HS-AF1-P756/00 Meqpâ'a Gulvisa Tinvyma Movidoanor Module.

The FTL Module has an oval ring appearance. The two emitter coil rings can be seen running on either side of the ring running parallel. Inside the module is the Gulvisa docking array. The image shows the docking array retracted. The armatures interface through the maintenance panels behind the coil cannons. The field coils are dark green when deactivated, and glow a teal when active.

There section provides stats for the module itself and the performance it provides for the Gulvisa.

• Class: Continuum Distortion Drive
• Nomenclature: HS-AF1-P756/01
• Type: Propulsion
• Designers: Otâmovi Wiy Jael (Silver Moon Sect)
• Manufacturer: Otâmovi Wiy Jael (Silver Moon Sect) on Poku Movi Vamâqi (Clan Void Berth)

• Crew: N/A

• Length: 11.5 meters ( 8.2 feet)
• Width: 9.75 meters ( 31.98 feet)
• Height: 4.75 meters ( 15.58 feet)

This section provides the speed the module can transport the Gulvisa.

• Tinvyma Piatypeda (Wave Rider Drive)
• 5,000c (~0.57 ly/h

Service Lifespan: Estimated 20 years of constant use, possibly longer with refits.

The module has the same systems as the HS-AF1-P756/00 Meqpâ'a Gulvisa Tinvyma Movidoanor Module except for the following:

• HS-AF1-P756/00 Gravity Shield - Removed
• HS-AF1-P756/00 FTL Tinvyma Movidoanor - Removed

The following system

The FTL Module uses a compact Class A Tinvyma Piatypeda (Wave Rider Drive) for propulsion.