The Star Army
Main Article: Star Army of Yamatai
Main Article: Star Army of Yamatai
The Kainushi-Class Tug Vessel is a ship used to maneuver large objects in space, it became available in YE 32.
The Kainushi Tug is a multipurpose utility craft. It is designed to move things much larger than itself. It can typically be found at shipyards, depots and on Anri-Class ships. These are some examples of how it used:
Depending on the size of the object teams of Kainushi can be used.
The Kainushi-class came about as a means of improving efficiency at shipyards and depots. Ketsurui Fleet Yards held a competition late in YE 31 among its employees. The Kainushi was the winning design. Design work and refinement continued into the beginning of YE 32 with the first working model being ready shortly into the new year.
The Kainushi is a squat, boxy craft with eight engines mounted on its sides, and two large armatures in front. The Kainushi are painted an off-white to increase their visibility.
Crew: 6 (Minimum 1) Maximum Capacity: There are accommodations for 8 personnel Emergency Capacity: 32 people can fit aboard in an emergency, but the ship would be extremely cramped.
Length: 20 meters (65.6 feet) Fuselage, 32 meters (104 feet) Overall Width: 12 meters (39.36 feet) Fuselage, 20 meters (65.6 feet) Overall Height: 10 meters (32.8 feet) Decks: 2 (4 meters each)
The Kainushi-Class is a nimble vessel.
Note: The Kainushi normally only travels at higher speeds when not carrying anything.
Service Lifespan: Estimated 20 years of constant use, possibly longer with refits.
Refit Cycle: Frequent minor updates through the PANTHEON system and a refit once every four to five years.
See Damage Rating (Version 3) for an explanation of the damage system.
Hull: 8 Shields: 8 (Threshold 1)
|One||Bridge, Captain's Office, Computer room, Wardroom, Toilets, and Showers|
|Two||Airlock, Medical Station, Fabrication, Engineering, Cargo Hold|
The Kainushi has a docking airlock. It is used for EVA, and transferring personnel from damaged vessels. It is located on the lower deck below the armatures.
The avionics on the Hainushi are mounted in a swiveling array in a dome on the top, to allow the craft to angle them for optimum operation.
The Kainushi features a Basic Small Starship Bridge for operating the craft. It is located on the upper deck in the bow. There are two toilets accessible from the bridge.
The Captain's office is a small room where the Captain can take care of administrative tasks. It contains a work desk with a control panel linked to the ship's computer. There is a padded chair for the Captain to use, and a work lamp on the desk. There is a small safe in the wall behind the desk. Located just aft of the bridge on the port side opposite the computer room.
The Kainushi has eight integrated bunks along the walls of the wardroom. Each bunk has a padded mattress, sheets (2) , pillow, blanket, a restraint harness to keep the occupant from being tossed around in an emergency, an internal light, intercom, and a privacy panel that the occupant can close to keep out sound and light.
Additionally the Kainushi features these crew amenities:
The Kainushi has most of the standard engineering features with the exception of no FTL drives.
The Kainushi has a very limited fabrications area, equivalent to a Ke-P1-06a - Workshop. It is solely present to allow the crew to make in-flight repairs to the ship. It is located starboard of the airlock on the lower deck.
The Kainushi uses standard maintenance conduits for allowing access to internal systems.
The Kainushi has a small room just off the Wardroom, where an Ke-J1-E3102 - Autonomous Basic Medicine Unit (ABMU) is installed for treating injured personnel.
The Kainushi uses Standard Passageways for movement within the ship.
The Kainushi has a combination conference room, dining area, and rec room. There is a large octagonal table in the center of the room, and two small tables along the far wall. The large table has a holoprojector for use during meetings, and for recreation. A Ke-T8-M3102 Comfort Module is mounted next to a pair of microwave/convection ovens. A freezer is installed beneath the counter that stores an assortment of precooked foods. An under counter dishwasher is also present to clean up cutlery and dishes.
The Kainushi has a Yamataium frame to provide structural strength for the ship. Its outer hull is Durandium Alloy plates .125 meters thick. All windows are made of Transparent Durandium and have an auto-polarizing screen to control the amount of sunlight that comes in.
The Kainushi has the following systems from the CIES.
Unidirectional sensors include variable wide-band imaging clusters, long-range gravimetric and magnetic resonance, distortion sensors and spectrometers, multi-band radar, and laser range finder. They are mounted dorsally and can be rotated as needed.
The Kainushi uses the following communications system:
The Kainushi has a very simple intercom system. At least one intercom unit is present in each room near the exit. Some rooms such as the bridge have additional units at each bridge station. Each unit has an integrated speaker and sound activated microphone. A simple keypad allows the user to turn it off/on and select the desired station.
The Kainushi has two Ke-L7-M3200 Matter Collection Systems installed dorsally and ventrally. The hydrogen collected is used to provide fuel for the plasma drives.
The Kainushi is propelled by eight KFY Ke-L7-P3200 Plasma Drives. The drives are mounted on swivel assemblies to allow the drives to control thrust direction. Fuel is gathered by the Ke-L7-M3200 Matter Collection System.
The Kainushi also features eight KFY Ke-L7-P3201 Maneuvering Thruster clusters for docking and station keeping.
The Ke-L7-M3201 Armatures on the Kainushi allow the ship to grab hold of the item it is going to move. It is equipped with two armatures. Each is constructed out of Yamataium to provide maximum strength. Each armature ends in four 'fingers' that actually grab the object. Each finger has a non-skid pad to assist with gripping. In those cases where there is no convenient grip points each finger tip can dispense Molecure solution to create a temporary bond.
Each of the armatures have a series of explosive bolts installed where they attach to the Kainushi. In the event of an imminent catastrophic event the bolts can be blown allowing the ship to jettison the object and take evasive action.