The Section 6 Anubis Hazardous Environment Helmet, more commonly referred to as the Anubis or the AHEH, is a fully enclosed hazmat helmet designed and manufactured by Section 6 in YE 40 primarily for the B.R.R.F and an optional piece of equipment for other sections of their military – Section 6 contacted their friends over at Galactic Horizon to include some of their components in the helmet’s design, naturally the corporation was more than happy to oblige.

The S6-AHEH is an emp-hardened, biohazard helmet meant to be used in place of the Revenant’s usual helmet, it features four MOASS sensors¹⁾ that project themselves onto a graphene eye shield as well as a beefier respiration system over the mouth capable of accepting filters designed by Galactic Horizon – underneath this is an Aegium frame that is then padded with a layer of Bulletproof Wool treat to be resistant to stains, fire, bacteria, insects, and sweat build-up, this layer also acts as kinetic buffer to cushion the force of successful attacks on the wearer while a similarly padded ASCI pads the top of the helmet.

There is also a variant available with an additional armoured section over the graphene eye shield, providing additional protection to the eye region of the helmet.

The S6-AHEH almost has the appearance of a lupine headdress combined with a gas mask, with the visor extending forward in a snout-like fashion and the two antennae at the rear of the helmet sticking up like ears – with the MOASS sensors being kept in a module on either side of the head, a blue eye shield of graphene across the eye section and a rebreather below this. Two flashlights are embedded in the visor and overall the helmet suits the style of Section 6 yet is different enough to help the B.R.R.F members stand out from other armed forces.

The S6-AHEH is worn in a similar fashion to a pilot’s helmet, it is simply lined up with the suit’s ports and then pulled down over the top of the head – creating a seal with the suit and syncing up with its systems. The faceplate below the eye shield can detach from the faceplate entirely or just one side to pivot away from their face if the need arises, the helmet is removed the same way it is doffed though usually requires a software confirmation to avoid explosive decoupling from occurring.

The unit features a small fusion battery in the back of the helmet but usually relies on the suit’s power when it is available, the threaded ports on the front of the helmet are designed to be compatible with filters designed and manufactured by Galactic Horizon to alter the respiration capabilities of whatever power armour it is linked up to.

The Communications capabilities include satellite (if available), peer to peer relay and standard radio while vision modes include low light vision, IR, thermal and x100 zoom standard optical - all with a laser range finder.

Below is a list of purchasable replacement parts for the S6-AHEH:

Replacement Power Supply Unit: 40ks

Replacement Respiration System: 20ks

Replacement MOASS sensor: 50ks

Replacement ASCI: 50KS

Replacement comms module³⁾: 150KS

SirSkully created this article on 2018/12/13 01:21.

This article was approved here by Wes and Ametheliana.