Guessing Endoh was quite busy, Junko continued staring at the screens for some time until a soft chime indicated the fabrication was complete. She quickly exited Engineering, making her way across the main corridor into the Fabrication Bay. There she found the three units and spools of cabling neatly set out.
It took some time to ferry the coil units into position, first into Engineering, then up to the Deck Four catwalk, and finally through the conduits to the end of the pylon, making ample use of her inertia manipulation all the way. Finally done, she returned to Engineering to gather up the repair kit and cable spools. She casually floated up to the catwalk, a break from her habit of using the ladders, and entered the conduit.
Once in the generator space, she busied herself disconnecting the damaged coil units from their mountings and set them aside as best she could in the tight space. That done, she began mounting the new units, double checking all of the sensor and control ports along the way. At the last, she pulled apart her jury-rigged work around circuit and used the new cables to re-link the full system. After a few cursory tests and diagnostics, she decided her repair job was about as good as she could make it outside of a yard and headed back for Engineering.
She took a moment to return the various pieces of equipment from the repair pack back to their correct locations before settling down in her station.
“Bridge, Takeda. I've completed all of the repairs to the CFS that I can do for now. You should have full or near full functionality back, but having been unable to do proper testing I strongly advise that the system not be pushed to maximum output.”